焊接專機的零部件檢查需要注意從哪幾個方面開始呢？確認山東焊接專機的零部件是否齊全，包括焊接槍、控制器、電源、電纜等，檢查其是否完好無損、連接是否緊固。

What aspects should be paid attention to when inspecting the safety of components of a welding machine? Confirm whether the components of the Shandong welding machine are complete, including welding guns, controllers, power supplies, cables, etc., and check whether they are intact and connected securely.

檢查焊接專機的電源，查看電源線是否有損傷或裂痕，插頭是否松動，電源開關是否正常。

Check the power supply of the welding machine, check whether the power cord is damaged or cracked, whether the plug is loose, and whether the power switch is normal.

檢查焊接槍，包括槍頭、槍線、電極、噴嘴等部件是否有損傷或磨損，是否清潔，電極是否松動等。

Check the welding gun, including the gun head, gun wire, electrodes, nozzles, and other components for damage or wear, cleanliness, and looseness of electrodes.

檢查控制器，查看控制器的指示燈是否正常，控制按鈕是否靈活，控制器內部的接線是否牢固，是否有短路現象。

Check the controller to see whether the indicator light of the controller is normal, whether the control buttons are flexible, whether the internal wiring of the controller is secure, and whether there is a short circuit.

檢查電纜，包括電源線、焊接槍線等，查看電纜是否磨損、斷裂、老化，是否要更換。

Check the cables, including power lines, welding gun lines, etc., to see if they are worn, broken, aged, and need to be replaced.

檢查焊接專機的保護裝置，包括過載保護、過熱保護等，確保焊接專機能夠在正常工作量范圍內運行，避免因過載或過熱導致事故。

Check the protective devices of the welding machine, including overload protection and overheat protection, to ensure that the welding machine can operate within the normal workload range and avoid safety accidents caused by overload or overheating.

檢查焊接專機的裝置，如開關、防護罩等，確保在操作過程中能夠有效地避免人員受傷或設備損壞的情況。

Check the safety devices of the welding machine, such as safety switches, protective covers, etc., to ensure that personnel injury or equipment damage can be effectively avoided during operation.

焊接專機的零部件檢查需要仔細檢查和確認，確保設備的正常運行和使用的性。如果發現任何問題，需要及時更換或修理，以確保設備的正常使用。想了解更多關于焊接專機事項，可來聯系我們http://m.tj-moju.com！

The safety inspection of the components of the welding machine requires careful inspection and confirmation to ensure the normal operation and safety of the equipment. If any problems are found, they need to be replaced or repaired in a timely manner to ensure the normal use of the equipment. To learn more about the welding machine, please contact us http://m.tj-moju.com ！